SEAL AND MAINTAIN POTABLE WATER STORAGE AND SUPPLY INFRASTRUCTURE

BLU PAINTABLE EPOXY

The BLU Paintable Epoxy System is used for sealing concrete for potable water and caustic chemical containment. BLU Paintable Epoxy has been approved for use with potable water applications such as water storage, tanks, municipal supples etc. This product allows application via paint brush and roller to provide versatility in the application process. Sold in 3 gallon kits.

Contact for Pricing

BLU PAINTABLE EPOXY

The BLU Paintable Epoxy System is used for sealing concrete for water and chemical containment. BLU Paintable Epoxy has been approved for use with potable water applications such as water storage, tanks, municipal supples etc. This product allows application via paint brush and roller to provide versatility in the application process. Sold in 3 gallon kits.

Contact for Pricing

POWERFUL, VERSATILE REPAIR COMPOUND

The BLU Hybrid Epoxy Coating is a 100% solids epoxy coating for wall and containment applications. BLU can be applied using a brush or roller much like paint. Once applied the BLU coating provides a high gloss finish. BLU should be used in areas requiring a high-bond protective coating with high chemical resistance. The BLU Hybrid Epoxy Coating is suited to containment applications where corrosive materials must be confined or to protect susceptible surfaces from corrosive materials. The BLU Hybrid Epoxy Coating is also suited to waste water treatment and sewage applications because if its high-bond and chemical resistance properties.

[WPCR_SHOW POSTID="469" NUM="5" PAGINATE="1" PERPAGE="5" SHOWFORM="1" HIDEREVIEWS="0" HIDERESPONSE="0" SNIPPET="" MORE="" HIDECUSTOM="0" ]

1. PREPARATION

First, the repair area is prepped by removing any deteriorated and damaged concrete. The area must be cleaned of any loose debris before application can begin. It’s important to give the concrete solution enough depth to anchor the surrounding structure. Once the loose concrete has been removed, the unfinished cracks can be ground down to allow for a more thorough bonding of the repair. Use leaf blower or broom to remove all debris, clean and let dry (use simple green if necessary).

2. MIXING

The 30 Minute Repair product is a patent pending polymer Hybrid Composite concrete repair formula. After years of extensive research is pleased to provide this unrivaled product. It comes packaged in individual pre-measured bags to allow for an easier mixing process. Simply add all the ingredients into an induction mixer and in 3 minutes the repair solution will be ready to apply. The 30 Minute Repair is 4x stronger than concrete and is ready for returned use in minutes not days.

3. APPLICATION

The third and final step is to apply the mixed material to the repair area. This is where the material is spread out, leveled and finished with a hand trowel for the appropriate thickness and slope. Then the material is dusted with a powder to best match the color of the surrounding area. After the simple 3-step concrete repair process is complete, you only need to allow approximately 60 minutes for the material to cure*. At this time, you will be able to walk or drive on the repaired area. *Final cure time may vary depending on outside temperatures.

THIS BAG CONTAINS CRYSTALLINE SILICA KNOWN THE STATE OF CALIFORNIA TO CAUSE CANCER

DO NOT BREATHE THIS PRODUCT

WARNING

YOU MUST HAVE RESPIRATORY PROTECTION TO USE THIS PRODUCT

Exposure to silica dust can cause severe, irreversible lung damage and death. Some medical reports state inhalation of silica dust may cause cancer. Medical reports also link breathing silica dust to crippling arthritis and skin and eye irritation. Fine silica dust is nearly invisible. Work areas must be thoroughly ventilated. Consult OSHA for acceptable ventilation standards and practices.

PROTECT EYES AND SKIN!

Silica dust can also be harmful to your eyes and skin. You need sufficient protection from exposure to silica dust. If eye contact and irritation takes place, flush your eyes continuously with clear cool water for at least 15 minutes and then see your doctor for treatment.

BEFORE YOU USE THIS PRODUCT

Review and thoroughly understand all health precautions outline in the material safety data sheet (MSDS) provided by your employer or the supplier of this material. It is a violation of federal safety laws for employers to require workers to use this material without full respiratory protection. Please consult OSHA for safe workplace standards.

STOP USING THIS PRODUCT AND SEE A DOCTOR IF YOU:

Have shortness of breath, coughing, lung and/or throat irritation. Have swelling of the joints and/or joint pain. Have eye and/or skin irritation. These are possible symptoms or problems developing from silica exposure.

KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.

DISCLAIMER OF WARRANTY

Western States Wholesale is making no recommendation for the use and purpose for which this product may be utilized. No guarantee of results are made as the conditions of installation are beyond out control. No representations or warranties, either expressed or implied, are made with respect to this product and its uses beyond the description on the face hereof, and in particular there are no implied warranties of merchantability or fitness for a particular purpose. Under no circumstances will Western States Wholesale be liable for consequential damages, or any damage in excess of the purchase price of this product.

WARNING

Western States Wholesale, as blender of processed material in the State of California, we are required by Proposition 65 to warn that one or more of the components in this product contains chemicals known to the State of California, to cause cancer, birth defects, or other reproductive harm.

PACKAGED BY CALIFORNIA SILICA PRODUCTS, LLC. ADELANTO, CA 92301