30 MINUTE CONCRETE REPAIR
In 2007, Founder Richard Paul Giles, a Civil Infrastructure Expert, saw an opportunity to provide a high quality, low cost asphalt repair technology, which was selected in 2011 as best in class by Federal Highway Administration. The technology was also selected by Department of Defense for airfield runway repairs; Mr.Giles had Caterpillar and Bobcat as global distribution partners. Through his knowledge and expertise, Mr. Giles developed a simple 3-step concrete repair method that would reduce business or traffic disruptions and can be completed at a fraction of the cost. In 2012 contracted services with numerous NASCAR Sanctioned race venues, Deer Valley and several other ski resorts, cities, school districts, food chains and several other national brands.
contracted services with numerous NASCAR Sanctioned race venues, Deer Valley and several other ski resorts, cities, school districts, food chains and several other national brands. 
Traditional Method
5,000 PSI
DAYS TO WEEKS
SUMMER MONTHS
COMPLETE CLOSURE
VS
STRENGTH
APPLICATION
REPAIR
WINDOW
TRAFFIC DISRUPTION
30 Minute Repair
UP TO 20,000 PSI
30 MINUTES
YEAR ROUND
MINOR DISRUPTION
30 Minute Repair
Strength - Up to 20,000 PSI
Application - 30 Minutes
Repair Window - Year Round
Traffic Disruption - Minor
VS
Traditional Method
Strength - 5,000 PSI
Application - Days to Weeks
Repair Window - Summer Months
Traffic Disruption - Complete Closure
THE THREE STEP PROCESS
1. PREPARATION
First, the repair area is prepped by removing any deteriorated and damaged concrete. The area must be cleaned of any loose debris before application can begin. It’s important to give the concrete solution enough depth to anchor the surrounding structure. Once the loose concrete has been removed, the unfinished cracks can be ground down to allow for a more thorough bonding of the repair. Use leaf blower or broom to remove all debris, clean and let dry (use simple green if necessary).
2. MIXING
The 30 Minute Repair product is a patented polymer Hybrid Composite concrete repair formula. After years of extensive research is pleased to provide this unrivaled product. It comes packaged in individual pre-measured bags to allow for an easier mixing process. Simply add all the ingredients into an induction mixer and in 3 minutes the repair solution will be ready to apply. The 30 Minute Repair is up to 4x stronger than concrete and is ready for returned use in minutes not days.
3. APPLICATION
The third and final step is to apply the mixed material to the repair area. This is where the material is spread out, leveled and finished with a hand trowel for the appropriate thickness and slope. Then the material is dusted with a powder to best match the color of the surrounding area. After the simple 3-step concrete repair process is complete, you only need to allow approximately 60 minutes for the material to cure*. At this time, you will be able to walk or drive on the repaired area. *Final cure time may vary depending on outside temperatures.
THE THREE STEP PROCESS
1. PREPARATION
First, the repair area is prepped by removing any deteriorated and damaged concrete. The area must be cleaned of any loose debris before application can begin. It’s important to give the concrete solution enough depth to anchor the surrounding structure. Once the loose concrete has been removed, the unfinished cracks can be ground down to allow for a more thorough bonding of the repair. Use air blower or broom to remove all debris, clean and let dry (use simple green if necessary).
2. MIXING
The 30 Minute Repair product is a patented polymer Hybrid Composite concrete repair formula. After years of extensive research is pleased to provide this unrivaled product. It comes packaged in individual pre-measured bags to allow for an easier mixing process. Simply add all the ingredients into an induction mixer and in 3 minutes the repair solution will be ready to apply. The 30 Minute Repair is 4x stronger than concrete and is ready for returned use in minutes not days.
3. APPLICATION
The third and final step is to apply the mixed material to the repair area. This is where the material is spread out, leveled and finished with a hand trowel for the appropriate thickness and slope. Then the material is dusted with a powder to best match the color of the surrounding area. After the simple 3-step concrete repair process is complete, you only need to allow approximately 60 minutes for the material to cure. At this time, you will be able to walk or drive on the repaired area.
COST COMPARISON
The cost savings of the 30 minute repair are multi-faceted. Not only does the repair last longer than other methods, it doesn't require the intensive remove and replace process that traditional concrete repair requires. More copy distinguishing the finer, though fundamental differences between the 30 Minute Repair and Traditional Concrete Repair.
Typical Sidewalk Section Repair
*Prep work may be required and charged by the hour.
Total cost for Traditional Concrete Repair - $755
Total cost for 30 Minute Repair - $250
START REPAIRING OUR NATIONS INFRASTRUCTURE
Become an Area Developer with an exclusive territory of franchisees to help manage and grow or become a franchisee to have your own concrete repair business! will help support you through either process by providing training, marketing materials, sales tools and the necessary equipment. Become your own boss and take advantage of this $84 Billion concrete repair market and claim your exclusive territory now!
concrete repair business! will help support you through either process by providing training, marketing materials, sales tools and the necessary equipment. Become your own boss and take advantage of this $84 Billion concrete repair market and claim your exclusive territory now!AREA DEVELOPER
FRANCHISE